Projet With ESP32 DHT11 and VGA Monitor

Projet With ESP32 DHT11 and VGA Monitor
  Bitluni Releases ESP32 VGA Board as a DIY Kit to Display Graphics on a VGA Screen
 

Schema


 


Code

Projet With ESP32 DHT11 and VGA Monitor

VGA              ESP32 

RED            - IO14   
GREEN          - IO19      
BLUE           - IO27      
GND            - GND      
HSync          - IO32     
VSync          - IO33

Library

REQUIRES the following Arduino libraries:
- VGA Library: https://github.com/bitluni/ESP32Lib
- DHT Sensor Library: https://github.com/adafruit/DHT-sensor-library
- Adafruit Unified Sensor Lib: https://github.com/adafruit/Adafruit_Sensor
Posted by

10 comments:

  1. DjMarch 23, 2021 at 10:43 AM

    good job can i use this out put for pixel led screen

    ReplyDelete
  2. subashsarafMarch 23, 2021 at 10:56 AM

    Sir,

    I love your great project Sir can you help me how to make RGB LED Matrix Clock Which is full function as inbuilt NTP ,DS3231 and temperature sensor like DST11 like "ESP8266 WebServer Weather Station DHT22 RGB Matrix P4 Clock"

    Link Below
    https://arduino-projects-free.blogspot.com/2019/05/esp8266-dht22-rgb-matrix-p4-weather.html

    Sir Please make the project with ESP32 and all these Module RTC DS3231 NTP and DST11/22

    Sir Please give me your email so that I will communicate with you

    My Email:- subashsaraf@gmail.com

    ReplyDelete
  3. subashsarafMarch 23, 2021 at 10:56 AM

    Sir Please Repl;y

    ReplyDelete
  4. subashsarafMarch 24, 2021 at 5:39 PM

    Sir kindly request you to waiting for your response

    ReplyDelete
  5. rogMarch 24, 2021 at 9:26 PM

    very good work, i have a question. how can change the time zone to my area, this is:
    Current: ECT — Ecuador Time
    Current Offset: UTC/GMT -5 hours ..
    do you can help me ?

    ReplyDelete
  6. jorgeMarch 30, 2021 at 7:36 PM

    very good work,, is possible to change the font, for big numbers? tanks

    ReplyDelete
  7. subashsarafApril 2, 2021 at 5:49 AM

    Hello Great Project,

    I love your great project Sir can you help me how to make RGB LED Matrix Clock Which is full function as inbuilt NTP ,DS3231 and temperature sensor like DST11 like "ESP8266 WebServer Weather Station DHT22 RGB Matrix P4 Clock"
    Link Below

    https://arduino-projects-free.blogspot.com/2019/05/esp8266-dht22-rgb-matrix-p4-weather.html

    Sir I try to made the project in ESP32 made by you in the above link and I have little bit success but not so much because I am not such a Great programmer like you!
    After I remake the project I am unable to get Weather Station (Temp and Humanity from DHT22) nor access HTML WebServer page to input the scrolling massage and GMT time So Sir kindly help me to solve the said problem I also change the modify .CPP file to adjust the PIN to use DS3231 and DHT11 module .Here I attached the all file for your reference Please make the project with ESP32 and all these Module RTC DS3231 NTP and DST11/22.
    My moto is at that when we on the RGB LED Matrix Clock scrolling massage.
    1. Fast it check NTP server then update the RTC DS3231 /
    2. if NTP server is not available or internet is not working the it continue the time from RTC
    3. A HTML WebPage for adjust GMT time and input scrolling Message with scrolling speed slider as it in your previous project
    Please download the link
    https://drive.google.com/drive/folders/14SJ9GIfOqNPe3rC0sO0t1MEH3_OiTIVO?usp=sharing

    ReplyDelete
  8. subashsarafApril 8, 2021 at 11:00 AM

    Hello Great Project,

    I love your great project Sir can you help me how to make RGB LED Matrix Clock Which is full function as inbuilt NTP ,DS3231 and temperature sensor like DST11 like "ESP8266 WebServer Weather Station DHT22 RGB Matrix P4 Clock"
    Link Below

    https://arduino-projects-free.blogspot.com/2019/05/esp8266-dht22-rgb-matrix-p4-weather.html

    Sir I try to made the project in ESP32 made by you in the above link and I have little bit success but not so much because I am not such a Great programmer like you!
    After I remake the project I am unable to get Weather Station (Temp and Humanity from DHT22) nor access HTML WebServer page to input the scrolling massage and GMT time So Sir kindly help me to solve the said problem I also change the modify .CPP file to adjust the PIN to use DS3231 and DHT11 module .Here I attached the all file for your reference Please make the project with ESP32 and all these Module RTC DS3231 NTP and DST11/22.
    My moto is at that when we on the RGB LED Matrix Clock scrolling massage.
    1. Fast it check NTP server then update the RTC DS3231 /
    2. if NTP server is not available or internet is not working the it continue the time from RTC
    3. A HTML WebPage for adjust GMT time and input scrolling Message with scrolling speed slider as it in your previous project
    Please download the link
    https://drive.google.com/drive/folders/14SJ9GIfOqNPe3rC0sO0t1MEH3_OiTIVO?usp=sharing

    ReplyDelete
  9. subashsarafApril 8, 2021 at 11:00 AM

    Waiting for your Reply sir

    ReplyDelete
  10. subashsarafMay 29, 2021 at 1:14 PM

    Please make ESP32 Weather Station Clock Scrolling Message Matrix P4 DHT22 Web Server

    ReplyDelete

Subscribe to: Post Comments (Atom)